- Home
- Reviews
Reviews & research reviews
Straight answers on the tools, materials and kit for 3D printing, laser engraving and vinyl, from our Logan studio.
Pick, then make
Polymaker PolyLite PLA (1.75 mm, 1 kg)
A widely sold general-purpose PLA with a good track record for easy, clean prints. Our assessment is research-based.
Read guideeSUN PETG (1.75 mm, 1 kg)
A popular PETG for parts that need to take more heat and knocks than PLA. Our assessment is research-based.
Read guideSUNLU FilaDryer S2
A compact, single-spool filament dryer that independent reviewers rate highly for the money. Our assessment is research-based.
Read guideCreality Space Pi V2 filament dryer
A higher-powered filament dryer with presets and a long timer. Our assessment is based on published specs only, as we found no independent review of the V2.
Read guidexTool D1 Pro 10W diode laser
A capable desktop diode laser that reviewers praise for speed and area. Our assessment is research-based, with safety front and centre.
Read guideCricut Explore 3
A consumer cutting machine for vinyl, iron-on, paper and card, best known for mat-free Smart Materials. Our assessment is research-based.
Read guideSilhouette Cameo 5
A hobby and small-business cutter with high published cutting force and a wide tool range. Our assessment is based on specs, as we found no independent review.
Read guideHakko CHP-170 micro cutter
A small, inexpensive flush cutter from a known brand, well suited to trimming filament and supports. Our assessment is research-based.
Read guideMitutoyo 500-196-30 digital caliper (150 mm)
A well-known 150 mm digital caliper, the tool for measuring parts before you model a replacement. Our assessment is based on published specs.
Read guideWhat the internet thinks
Crowd favourite
- SUNLU FilaDryer S2A crowd favourite brand, and the S2 is the cheap, simple one. Most complaints are about limits, not failures.
- Polymaker PolyLite PLA (1.75 mm, 1 kg)Quietly well regarded: the sort of PLA people recommend because it stays out of the way.
Solid, low drama
- Mitutoyo 500-196-30 digital caliper (150 mm)A respected name, but the score leans on the brand and specs more than on reviews.
- eSUN PETG (1.75 mm, 1 kg)Well liked for the money, as long as you are happy to tune PETG a little.
- Hakko CHP-170 micro cutterCheap, cheerful and hard to argue with. Few complaints, mostly about its limits.
Divisive
- xTool D1 Pro 10W diode laserAdmired for accuracy and speed, with some owners reporting reliability and parts headaches. Opinions are strong on both sides.
- Silhouette Cameo 5Capable hardware with software teething troubles reported on at least one variant. Check the current Silhouette Studio notes before you buy.
Widely criticised
- Cricut Explore 3Hugely popular and widely criticised at once. The machine is easy to love, while the company's support and software take the heat.
Too early to call
- Creality Space Pi V2 filament dryerToo early to call: good noises about the family, but nothing solid on this model yet.
Based on public reviews, forums and owner feedback we read, as of 17 November 2026. These are summaries of other people's opinions, not our own test results, and individual experiences vary.
Our picks at a glance
| Best for | Pick | Rating |
|---|---|---|
| Starter filament | Polymaker PolyLite PLA (1.75 mm, 1 kg) | 8.0/10 (research) |
| Tougher everyday prints | eSUN PETG (1.75 mm, 1 kg) | 7.8/10 (research) |
| Budget filament dryer | SUNLU FilaDryer S2 | 8.2/10 (research) |
| Feature-rich filament dryer | Creality Space Pi V2 filament dryer | 7.0/10 (research) |
| Entry diode laser | xTool D1 Pro 10W diode laser | 7.8/10 (research) |
| Hobby vinyl cutter | Cricut Explore 3 | 7.0/10 (research) |
| Vinyl cutter with more cutting force | Silhouette Cameo 5 | 7.2/10 (research) |
| Flush cutters | Hakko CHP-170 micro cutter | 7.8/10 (research) |
| Precision caliper | Mitutoyo 500-196-30 digital caliper (150 mm) | 8.0/10 (research) |
How we review
Tested reviews are products we have used in the studio, and they carry a score out of 10. Research reviews are our written assessment of a product, based on the maker's published specs and independent reviews we have read, which are linked at the bottom of each page. Their research score out of 10 reflects how well the product looks on paper and in other people's reviews, with a confidence level showing how much evidence we found. It is not a hands-on test result.
We earn a commission if you buy through our Amazon links, but scores and opinions are ours. See the bottom of any review for the full note. Spotted a mistake? Email hello@aresmakes.com and we will correct it and log the change.
Rather have it made for you?
Send us a file, a photo or a rough sketch. We'll reply with a firm price within 24 hours.