The Space Pi V2 turns up with a spec sheet like a sports car: 75 °C, a 48-hour timer, 12 presets. What it doesn't turn up with yet is a pile of independent reviews, so we've marked it down for the unknowns.
On paper the Space Pi V2 is the more capable dryer: a 75 °C ceiling, 360° hot air circulation with ceramic PTC heating, a touchscreen that shows humidity, and power-loss memory that resumes drying after an outage.
Our verdict: promising and worth a look if you dry several materials, but we are cautious about recommending something we cannot back with independent testing. Read buyer reviews before you commit.
Pros
- 45–75 °C range
- 12 presets and a timer of up to 48 hours
- Takes spools up to 190 mm in diameter and 68 mm wide
- Power-loss memory resumes the last drying settings
- Handles both 1.75 mm and 2.85 mm filament
Cons
- Rated power of 145 W, much more than the 48 W S2
- Number of spools it holds is not stated on the page we read
- We could not find an independent review of the V2
- Heavier and larger than the S2: about 1.5 kg
What the internet says
A summary of public reviews, forum threads and owner feedback we read, as of 17 November 2026. These are other people's opinions, linked at the bottom.
What people love
- Reddit commenters praising the wider Space Pi line mention quiet running and good capacity (not specific to the V2)
- Strong specifications on paper: 75 °C, 12 presets, long timer
What people complain about
- We could not find independent reviews of the V2 itself
- Draws far more power than the S2 (145 W against 48 W)
- Spool capacity not stated on the page we read
The consensus: Too early to call: good noises about the family, but nothing solid on this model yet.
See today's price for the Creality Space Pi V2 filament dryer on Amazon → (affiliate link)
How it compares with the S2
The Creality lists a higher maximum temperature (75 °C versus 70 °C), presets, a longer timer and roller-based spool support. The S2 is simpler, draws far less power and has strong independent reviews. If you only dry PLA and PETG, the extra capability may not matter to you.
Who it isn't for
- People who want a dryer with independent reviews behind it
- Anyone who needs a confirmed multi-spool capacity
Specifications
| Temperature range | 45–75 °C |
|---|---|
| Timer | Up to 48 h |
| Rated power | 145 W |
| Voltage | 220–240 V |
| Spool limits | ≤190 mm diameter, ≤68 mm wide |
| Size | 390 × 100 × 279 mm |
| Weight | about 1.5 kg |
Manufacturer figures. We have not bench-tested these.
Alternatives
- SUNLU FilaDryer S2cheaper and simpler
Questions
Is a higher temperature better?
Only if your filament needs it. Always follow the filament maker's guidance, since too hot can warp the spool.
Is it suitable for Australian power?
The listing gives 220–240 V, which matches Australian mains. Check the plug and local warranty before buying.
What we read
This is a research review. We have not tested the product ourselves. Our opinions are based on these sources: