Both PETG and ABS are stronger and more heat tolerant than PLA, but they behave very differently. Here's a plain comparison to help you choose the right one for your part.
| PETG | ABS | |
|---|---|---|
| Strength | Tough and slightly flexible | Strong and rigid, can be brittle in thin parts |
| Heat resistance | Good, to about 70 C | Better, to about 95 C |
| Outdoor and sun | Good, with decent UV resistance | Good for heat, can yellow in strong sun over time |
| Ease of printing | Easier. Stringing can occur | Harder. Needs an enclosure and good ventilation |
| Finish | Glossy, smooth | Can be smoothed with acetone vapour |
| Best for | Brackets, outdoor parts, containers, everyday use | Car interiors, hot environments, parts you want to finish by smoothing |
Which should you choose?
- Choose PETG for most functional parts, outdoor fittings and anything that needs to be tough but forgiving.
- Choose ABS when heat is the main concern, such as parts near engines, heaters or in a hot car.
- Choose PLA for display pieces, prototypes and indoor use. See PLA vs PETG vs ABS.
Printing at home
ABS needs a warm, draught-free enclosure and good ventilation because it gives off fumes when printed. PETG is easier for beginners and is usually the better first step up from PLA. Store both dry, as they absorb moisture.
Let us print it for you
Not sure which to use? Tell us where the part will live and we'll recommend a material. We print in PLA, PETG and ABS, and quote before we start. Try our instant quote or the quote form.
As an Amazon Associate, Ares Makes earns from qualifying purchases. Recommended products are things we use or would buy ourselves; buying through these links supports the studio at no extra cost to you. We may also earn a commission from other retailers linked in our guides.